 |
1. SCOPE
This document defines the requirements for the switch mode power supply units model TPE-020-02B. The TPE-020-02B has two L.T. output rails delivering between 10 Watts and 30 Watts of power, The output supply voltage has over voltage, and over current protection. The over current protection is non-latching type called hiccup mode, sensing carried out on the primary side. It has an AC input operating range of between 90V - 264V. |
|
2.APPLICABLE DOCUMENTS
2.1 SAFETY STANDARDS
* UL1950
* CSA22.2 NO.950
* EN60950
2.2 EMI STANDARDS
DESIGNED TO MEET THE FOLLOWING LIMITS
* CC PART 15 CLASS B
* CRIP 22 CLASS B
* N55022 |
|
3. INPUT REQUIREMENT
|
|
4. OUTPUT REQUIREMENT
|
|
5. GENERAL FEATURES
|
|
6. ENVIRONMENTAL REQUIREMENTS
<<6.1 TEMPERTURE REQUIREMENTS
 |
|
7. MECHANICAL REQUIREMENTS |
|
7. MECHANICAL REQUIREMENTS
<<< |
|
7. MECHANICAL REQUIREMENTS
<<< 7.1MECHANICAL: 105mm x 63mm x 35mm (LxWxH) * 0.4mm
<<<<<<Mount pillar 83.5x55 mm |
|
7. MECHANICAL REQUIREMENTS
<<< 7.1MECHANICAL: 105mm x 63mm x 35mm (LxWxH) * 0.4mm
<<<<<Mount pillar 83.5x55 mm |
|
7. MECHANICAL REQUIREMENTS
<<< 7.1 MECHANICAL: 105mm x 63mm x 35mm (LxWxH) * 0.4mm
<<<<<<<Mount pillar 83.5x55 mm |
|
AC INPUT connector UL Approved MOLEX 3.96 3PIN HOUSING.
DC OUTPUT connector UL Approved MOLEX 3.96 4PIN HOUSING. |
|
PIN1: V+
PIN2: GND |
|
PIN3: GND
PIN4: V- |